Wiring Guide
9 DVC 1Ω subs, wired in parallel.
- Final load
- 0.222Ω
- Amp stable at
- 0.25Ω
Heads up: 0.222Ω is below most amplifier ratings. Verify your amp is rated for this load before wiring.
Step-by-step
How to wire it.
- 01For each sub, connect voice coil 1 negative (−) to voice coil 2 positive (+). The remaining voice coil 1 positive (+) becomes the sub's effective +, and voice coil 2 negative (−) becomes the effective −.
- 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
- 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.
Related Configurations
Other 9-sub configs.
Support
Pairing an amplifier?
Tell us the driver, the enclosure, and the final load. Our team will recommend amplification at the listed RMS and confirm the wiring before you commit.