Wiring Guide
8 DVC 8Ω subs, wired in parallel.
- Final load
- 0.5Ω
- Amp stable at
- 0.5Ω
Heads up: 0.5Ω load — you'll need an amplifier rated stable at 0.5Ω.
Step-by-step
How to wire it.
- 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
- 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
- 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.
Related Configurations
Other 8-sub configs.
Support
Pairing an amplifier?
Tell us the driver, the enclosure, and the final load. Our team will recommend amplification at the listed RMS and confirm the wiring before you commit.