Wiring Guide
5 DVC 0.5Ω subs, wired in series.
- Final load
- 1.25Ω
- Amp stable at
- 1Ω
Note: Most quality monoblock amps are 1Ω stable. Check your amp's spec sheet.
Step-by-step
How to wire it.
- 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
- 02Connect the amplifier's + terminal to Sub 1's + terminal.
- 03Connect Sub 1's − terminal to Sub 2's + terminal.
- 04Connect Sub 2's − terminal to Sub 3's + terminal.
- 05Connect Sub 3's − terminal to Sub 4's + terminal.
- 06Connect Sub 4's − terminal to Sub 5's + terminal.
- 07Connect Sub 5's − terminal back to the amplifier's − terminal.
Support
Pairing an amplifier?
Tell us the driver, the enclosure, and the final load. Our team will recommend amplification at the listed RMS and confirm the wiring before you commit.