Wiring Guide
3 DVC 1Ω subs, wired in series.
- Final load
- 1.5Ω
- Amp stable at
- 1Ω
Note: Most quality monoblock amps are 1Ω stable. Check your amp's spec sheet.
Step-by-step
How to wire it.
- 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
- 02Connect the amplifier's + terminal to Sub 1's + terminal.
- 03Connect Sub 1's − terminal to Sub 2's + terminal.
- 04Connect Sub 2's − terminal to Sub 3's + terminal.
- 05Connect Sub 3's − terminal back to the amplifier's − terminal.
Related Configurations
Other 3-sub configs.
Support
Pairing an amplifier?
Tell us the driver, the enclosure, and the final load. Our team will recommend amplification at the listed RMS and confirm the wiring before you commit.